Boiler Pressure

Boiler Issue

Step 1 of 3

Full Name(Required)

Email(Required)

Phone Number(Required)

Property Address(Required)

Street Address Address Line 2 City Postcode

Make of boiler (Should be visible on front of boiler)(Required)

What is the issue?(Required)

Please share pictures of the boiler?

Drop files here or

Max. file size: 50 MB.

When is the best time for this repair to happen? (This might not be possible due to our contractors schedule)(Required)

Please tell us the nature of the issue?(Required)

The more information you provide us the faster we can get this issue sorted

Boiler Pressure

Boiler pressure issues can be a common problem in home heating systems. Here's a step-by-step guide to help you diagnose and potentially fix the issue:

Identifying the Problem

Check the Pressure Gauge: The first step is to look at the boiler's pressure gauge. Normally, when the system is cold, the pressure should be between 1 and 1.5 bars.

If the Pressure is Too Low

Below 1 Bar: If the gauge indicates a pressure below 1 bar, it's considered too low.

Causes: This could be due to water leaks in the system, bleeding radiators, or a natural decrease over time.

Fixing Low Pressure:

Repressurizing the Boiler: Most boilers have a filling loop that can be used to repressurize the system. Follow your boiler's manual for specific instructions on how to do this.

Check for Leaks: Inspect the system for any visible leaks. If you find a leak, it's advisable to contact a professional to fix it.

If the Pressure is Too High

Above 1.5-2 Bars: A reading significantly higher than 1.5 or 2 bars indicates too much pressure.

Causes: This can be due to overfilling the system, a fault in the pressure relief valve, or other issues.

Fixing High Pressure:

Bleeding Radiators: This can help reduce the pressure. Use a radiator key to open the bleed valve and let out excess air and some water.

Professional Check: If bleeding the radiators doesn't help, or if you're unsure about it, it's best to call a heating engineer.

General Tips

Safety First: If you're not confident in performing these tasks, or if the issue persists, always consult a professional. Tinkering with a boiler without proper knowledge can be dangerous.

When to Call us or report the issue.

If you're unable to identify or solve the problem.
If there are consistent issues with pressure even after adjusting it.
If there are signs of water leakage or damage to the boiler.
If you suspect a malfunction in any part of the boiler.

Caution

Gas Boilers: If you have a gas boiler and you suspect any issues with the gas supply or smell gas, turn off the boiler, leave the premises, and contact your gas supplier immediately.

Do Not Over-Adjust: Repeatedly adding water or releasing pressure without finding the underlying cause can lead to more serious boiler problems.

If these steps don’t resolve the issue, or if you're uncomfortable performing them, it’s always best to contact a professional heating engineer for assistance. Regular maintenance by a qualified professional is key to ensuring the longevity and safety of your boiler.

This will close in 0 seconds